RK Flooring Systems Private LimitedRK Flooring Systems Private Limited

Products & Services



Showcase Gallery
Home » Industrial Waterproofing

Industrial Waterproofing

We are well known suppliers, traders and service providers of Industrial Waterproofing. Water proofing often refers to the penetration of liquid water. Our product range includes Liquid applied Cement based membranes-Brush bond, Liquid applied Cement based membranes-Brush bond RFX, Liquid Applied Cement Based Membranes-Brushcrete, Liquid Applied Cement Based Membranes-Hydro proof, Crystalline Waterproofing System-Brush bond TGP, Bituminous Waterproof Coating-Nit proof 100-120 and many more items.

Industrial Waterproofing

Water Stops-Supercast PVC

Water Stops-Supercast PVC

Water Stop-superfast PVC

Description

Centerally and extermelly placed PVC waterstops

Principal Use

To provide an integral sealing for movement and construction joints in concrete cast in situ Used in water retaining structural like reservoirs water tower sewages tanks dams,colvents,canals,swimming pools and spilways.Water excluding structure like basement,under ground car parks tunnel subways ,roof decks,podium areas etc

key Properties

Joint Movment          up to 10 mm
Elongation at break   300%
Tensile strength         14m/N?m³
Advantages:

  • Range of profiles to suit every need

  • Fully continuous 4 bulbed network

  • Reinforced eyeletted edge flanges for positive fixing

  • Simple on-site jointing

  • Full range of moulded and fabricated intersection pieces

  • WRC approval for use in contact with potable water





Water Stops-Supercast SW20

Water Stops-Supercast SW20

Super cast SW20

Descriptipon

Swelable waterstop for in situ concrete

Principal Use

Integral sealing for construction joints in concrete cast in situ where conventional waterstops are impractical to use because of limited access.Provides simple solution to detailing pipe enteries construction joints in vertical planes and to kicker joints.

Key Properties

Unrestrained volumetric expension   Up to 300%

Service temperature                          30º to 70ºC

Hydrostatic pressure resistance        100 meters

Application temp range                       20º to 50ºC


Advantages:

  • Easy to install by bonding, nailing or casting into joint faces

  • Factory made connectors enable full integration of Super cast SW20 and Super cast PVC networks

  • Solves detailing problems in conjunction with Super cast PVC range

  • Swelling properties unaffected by long term wet/dry cycling

  • Tolerant of salts present in concrete and ground water

  • Sustains effective seal in wet conditions.





Water Stops-Supercast SW10

Water Stops-Supercast SW10

 Super cast SW10

Description

Swellable waterstop for in situ concrete

Principal Use

Integral sealing for construction joints in concrete cast in situ .Provides simple solution to detailing pipe enteries construction joints in vertical planes and to kicker joints

Key Properties

Unrestrained volumetric expension       up to 300%

Hydrostatic pressure                              30m(3 bars) resistant

Application temp range                            20ºC to 50ºC

Service temp range                                  30ºC to 70ºC 


Advantages:

  • Easy to install Super cast SWX swellable adhesive enables full integration of Super cast SW10 and Super cast PVC networks

  • Solves detailing problems in conjunction with Super cast PVC range

  • Swelling properties unaffected by long term wet/dry cycling

  • Sustains effective seal in wet conditions

  • Delayed swell action allowing extra tolerance on site

Specification


Super cast SW10 is a swellable water stop that can be installed and positively linked into conventional Super cast PVC water stop networks.





Water Stops-Supercast SW30

Water Stops-Supercast SW30

.supercast SW30 
Description
High steel hydrophlic waterstop for situ concrete
Principal Use
Integral sealing for construction joints in concrete cast in-situ where high swell performance is demarded such as in highly saline ground condition Typical uses include secant piled and diaphragm walled basement pile caps and casting againest old concrete 

Advantages:

  • Easy to install

  • Supercast SWX swellable adhesive enables full integration of Super cast SW30 with Super cast PVC networks

  • Solves detailing problems in conjunction with Super cast PVC range

  • Swelling properties unaffected by long term wet/dry cycling

  • Performs effectively in saline ground conditions

  • Sustains effective seal in wet conditions


Specification:


Super cast SW30 is a swelling water stop that can be installed and positively linked into conventional Super cast PVC water stop networks.





Liquid Applied Cement Based Membranes-Brushcrete

Liquid Applied Cement Based Membranes-Brushcrete

 brushcrete

Description

Acrylic polymer for concrete & masonery

Principal Use

Provides a seamless waterproof coating to concrete & masonery surface it can be used as a water proof or protective coating.Aeeas of application includes waterproof or protective coating of toilets water retaining structure

Key Properties

Pot Life at 30ºC        20-30 min

Bond strength with concrete  >N/mm

Advantages:

  • Can be applied in uniform thickness to horizontal and vertical surfaces

  • Develops excellent bond to most building materials

  • Improves mechanical & physical properties of the coating system when used in conjunction with cement

  • Reduces or prevents salt penetration into concrete

  • Resistance to ultraviolet light or by chemicals ranging from mild acids to strong alkalies

  • Is highly impermeable in continuous wet condition

  • Is non-flammable and does not give off toxic gases, when exposed to fire

  • Non toxic

     

Specification
 

Brushcrete is a single component acrylic based polymer when blended with cement forms a composite polymer modified cementitious waterproofing system, when used in conjunction with fibre mesh forms a tough hard wearing surface.





Crystalline Waterproofing System-Brushbond TGP

Crystalline Waterproofing System-Brushbond TGP

Brush bond TGP

Description

Crystalline capilliary water proofing system for cementious substrate

Principal Use

For water proofing againest the positive or negative sides of hydrostatic heads of water.Used in severage & water treatment plants,tanks,foundation tunnels and manholes.roofs and sunken slabs, terrace garden balconies,reservoirs and water holding

Key Properties

Pot Life     40 mins

specific Gravity   1.6 to 2.0g/cc


Advantages:

  • Meets the requirements as per ANSI/NSF Std 61 for suitability to potable water

  • Penetrates concrete, seals capillary tracts

  • Contains no chloride

  • Easy to apply

  • Resists chemical attack of sewage and industrial wastes

  • Suitable for external and internal applications


Specification


Brushbond TGP* crystalline capillary waterproofing system contains proprietary blend of portland cement, quartz aggregate and special chemicals. In the presence of moisture, the active chemicals in Brushbond TGP* crystalline waterproofing system penetrates concrete and react chemically with free lime to produce insoluble crystals. This crystalline growth reduces porosity by blocking capillaries and filling hairline non structural cracks ( upto 0.25mm wide) caused by shrinkage or expansion.





Injection Hose System-Supercast Predimax Injection Hose

Injection Hose System-Supercast Predimax Injection Hose

super cast predimax injection hose,

Description

injection hose for protection againest potential and active leeak in construction and cold joints concrete

Principal Use

Designed to prevent passage of water through concrete joints Construction and cold joints water excluding structures water retaining structure.STP below ground concrete construction

Key Properties

Material                        PVC                      PVC

Internal Dia                  6mm                    11mm

External Dia                 11mm                    19mm

Injection opening          6mm                     8mm

Injection length            10-12                    12-15

Advantages:

  • Economic - Reinjection option prevents leaks caused by settlement or structural movement

  • Non destructive - No drilling or damage to the concrete

  • Ease of use - Simple installation even at complicated details

  • Proven and predictable performance

  • Maintenance free system

  • Verifiable - testing of joints for watertightness before installation of membrane or back filling

  • Smooth surface avoids bonding between injection hose and concrete

  • .Suitable for operation under high or low injection pressure


Specification

Supercast Predimax Injection Hose comprises of a double walled, patented (European & American) PVC hose specially formulated to be durable, robust and fully resistant to continuous immersion in ground water, saline, sewage, alkalis, acids, petrol, diesel and alcohol. The hose has exist openings (slots) for the pressure-fed injection material.





Water Stops-Supercast SWX

Water Stops-Supercast SWX

 Super cast SWX.

Description

Problem solving gun grade hydrophillic and adhsive

Principal Use

Used as at adhsive for bonding Supercast SW strips or as a problem solving hydrolhlic in dificult access areas including sealing around joints in precast manhole covers cable ducts and pipes sealing around precast segment

Key Properties

Tack free time        Approx. 1 Hour

Swell Ratio             200%

Cure Ratio             3mmin 24 hours

Advantages:

  • Fast curing : Enables early concrete pour and rapid return to service Allows hand-applied concrete cover within 2 hours on emergency repairs and large-scale concrete pour after 8 hours

  • Excellent seal on rough concrete: Gives improved water tightness Plugs inequalities in rough concrete to product a tight seal

  • Excellent adhesion: Quick and easy to apply to a variety of damp and uneven joint surfaces remaining firmly in place during concrete pour

  • Water swellable: Expands by 200% producing a watertight compression seal

  • Durable: Excellent wet/dry cycling retaining elastomeric character and swelling performance due to high tolerance of the cementitious environment


Specification

Super cast SWX is a grey, elastomeric water-swellable paste which is applied like a sealant. The hydrophillic properties of Super cast SWX display good consistency in swell rate during repeated wet/dry cycling. Expansion of the product on contactwith water creates a positive pressure against the faces of the concrete joint, thus preventing the passage of water.





Polyurea Spray Applied Membrane-Fosroc Polyurea WPE

Polyurea Spray Applied Membrane-Fosroc Polyurea WPE

Fosco polyurea WPE
Description

Fast Setting ,pure polyurea elastomeric water proof coating

Principal Use

Anti corrosin ,waterproof and protective coating for concrete and steel in a wide range of eniovermental condition.


Advantages:

  • Environment friendly - zero VOC

  • Excellent chemical resistance, thermal stability and UV resistance

  • Very fast turn-around time, the coated substrate can be put into service within an hour

  • Excellent impact, abrasion and punture resistance

  • Seamless and monolithic, including field joints

  • Significantly enhances the durability of reinforced concrete

  • Low permeability values

  • Can be applied at ambient temperatures between -30o C to 70oC

  • Designed for service temperature from -30oC to 135oC

  • See Chemical Resistance and Colour sections

  • Note for applications below +5oC, consult Fosroc for specific advice.

  • Spcification

    Where mentioned in the contract drawing the protective and water proofing coating shall be Fosroc Polyurea WPE a 100% soildes,flexible two component rapid curing  pure polyurea coating system providing high corrosion ,abrasion  and thermal shock resistance








Sheet Membranes-Proofex OGP

Sheet Membranes-Proofex  OGP

 proofex OGP

Description

Loos laid synthetic TPO waterproofing membrane

Principal Use

Provides a contously loose laid waterfroofing membrane system for building and civill engineering structure -poodiums,garden roofs & basement waterproofing lining of ponds,canals.reservoirs and landfills

Key Properties

Thickness          1.2mm& 1.5mm

Elongation at break    Long>700%

Tensile strength     Long 1.3mm 16N/mm²

Advantages:

  • Environment friendly, no VOC, no plasticisers, non toxic

  • Cold applied

  • High resistance to weathering and UV

  • Fast application

  • Welded joints for maximum watertightness

  • No separation layers required on to EPS

  • Excellent long terms performance


Specification


TPO/FPA (Flexible Polypropylene Alloy) membrane produced by extrusion of granules resulting from the incorporation of ethylene propylene rubber into a polypropylene matrix together with other additives as appropriate to the type of membrane.





Sheet Membranes-Proofex Torchseal 3P & 4P

Sheet Membranes-Proofex Torchseal 3P & 4P

 Proofex Torch seal 3P & 4P.

Description

Tourch applied APP water proofing membrane

Principal Use

Provides water proofing and damp proof membrane for concrete roof & floor slabs basement tanking car park deck slabs tunnel and subways

Key properties

Elongation membane      Long>65%

Tensile strength              Long 790/5sqm

Reinforsed base             180g/m³

Advantages:

 

  • High strength reinforcement gives excellent resistance to puncture and stress
  •  Easily torch applied
  • Bonds well to the substrate
  • Readily formed to contours.


Specification


Proofex Torchseal 3P and 4P are quality torch applied APP based membranes manufactured from premium grade heavily modified bitumen, reinforced with a core of non-woven polyester fabric, weighing 180g/, rot-proof and is malleable.





Sheet Membranes-Proofex Engage

Sheet Membranes-Proofex Engage

Proofex Engage

Description

Pre applied blended PE/PP water proofing membrane which mechanically bonds to poured concrete labs remaining in place if settlement of substrate occurs

Principal Use

Provide water vapour and gas protection to structure and protects concrete from aggressive grout salts and chemicals used in waterproofing application including basements and substrate

Key Properties

Elongation (peak)    300%

Tensile Properties     Trans>8N/mm²

Tear resistance         _>600 N


Advantages:

  • Basement waterproofing protection to grades 2,3 and 4 as defined in BS8102:1990

  • To provide a vapour and waterproof membrane in building and civil engineering structures

  • Resistant to attack from chemicals and aggressive ground salts

  • Forms a tenacious mechanical bond to poured concrete remaining in place if settlement of the substrate occurs

  • Simple application - no primers or protection material required

  • Inert product - no risk of a reaction with ponded waste prior to concrete being poured

  • Durable - withstands inclement weather and resists construction related damage can be trafficked immediately after application

  • Facilitates flexible construction programming

  • Can be heat-welded


Specification


Proofex Engage is a unique patented system comprising complex cell mesh bonded to a polyethylene membrane which allows poured concrete to interlock with the membrane forming a tenacious mechanical bond. Proofex Engage is available in two colours, black and grey. The grey is specifically designed for use in Middle East and Tropical conditions.





Pitch Modified PU Waterproof Coating-Nitoproof 600

Pitch Modified PU Waterproof Coating-Nitoproof 600

Pitch Modified PU Waterproof Coating-Nitoproof 600

Description

Liquid applied single compound elastomeric waterproofing membrane

Principal Use

Ideal for a wide range of water vapour proofing application like foundation basements,tunnels,ground floors,suspended floors,car park decks,roof terraces balconies,patios water retaining structure etc also suitable for tanking applicatio in areas where aggressive ground water condition prevell.

Advantages:
  • High elastic
  • Rapid installation
  • Exellent adhsion
  • Imperious
  • Thermally stable
  • Exllent reistance to oxidation

Key Properties
   
  •       Full Cure at 1.3mm thickness
  •       Elongation        62%
  •       Permeablity      0.063mg/m/sec/Pa*1mg=10kg 

specification

Nitoproof 600 single component pitch modified polyurethane cures by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. It is supplied in a single grade to meet all site application methods and requirements.





Sheet Membranes-Proofex GP

Sheet Membranes-Proofex GP

Proofex GP

Description
 Cold Applied bituminous proofing membrane
Principal Use
To provide a continuosly bonded waterproof membrane for concrete roof & flor slabs basement tanking car park deck slabs tunnels & subways

Key Properties
Elongation of mambrane    Long 250%
                                       trans 200%
Tensile Strength                 Long 39N/mm²
                                        Trans 45N/mm²  
Advantages:

  • 1.5mm + 0.05 thick (Nominal)

  • Cold applied

  • Fast application

  • Uniform thickness of polymer bitumen membrane

  • Good adhesion to primed concrete substrates

  • Produces a continuous waterproof membrane system


.





Bituminous Waterproof Coating-Nitoproof 100-120

Bituminous Waterproof Coating-Nitoproof 100-120

 Bituminous Waterproof Coating-Nitoproof 100-120.

Description

Bituminuos water proof protective Coating

Principal us

Horizental and vertical damp proof membrain in sandwich construction for floors Walls and roofs Internal lining of water storage tanks including  for portable water External treatment of below ground structure againest water ingress and attack by aggressive ground water.

Key Properties

Specific gravity

Nitoproof 100     0.87-0.95g/cc

Nitoproof 200     1.25-1.40g/cc

Advantages:

  • Easy to use : Simple brush or trowel application

  • Cold applied :No heating or dangerous handling

  • Liquid membranes : Can be applied to rough or contoured surfaces

  • No joints :Continuous unbroken film

  • Non toxic : Safe with drinking water







Sheet Membranes-Proofex ORG

Sheet Membranes-Proofex ORG

 proofex ORG

Description

Loose laid reinforced TPO waterproofing membrane

Principal Use

Provide a continuously loose laid water proof membrane system for building and civil engineering structure-podiums,garden roofs & basement water proof lining of ponds,canals,resevoirs and landfills

Advantages:

  • Environment friendly, no VOC, no plasticizers, non toxic

  • Cold applied

  • Reinforced grade to achieve aesthetically pleasing finish

  • High resistance to weathering and UV

  • Fast application

  • Welded joints for maximum water tightness

  • No separate layers required on to EPS

  • Excellent long term performance


Key Properties
 
Thickness             1.2mm & 1.5mm
Elongation at break     Long >1000%
                                Trans >950%
Tensile strength           Long >9N/mm²

 




Nitobond BB-Brushbond

Nitobond BB-Brushbond

Description

Acryil polymer modified elastomeric waterproofing membrane coating for concrete and masonery surface

Principal use

Provides a seamless waterproof coating suitable for use in water tanks, reservoires swimming pools roofs and to ensure water tightness.

Key Properities

Pot Life 27ºC :        30 mins

Adhesion to concrete:     >1N/mm²

Advantages:


  • Minimum surface preparation needed - Low labor costs

  • Applied directly to the damp concrete and masonry

  • Excellent adhesion - Bonds to porous and nonporous surfaces

  • Non-toxic-ideal for potable water tanks

  • Waterproof - Excellent for damp-proofing basements

  • Breathable-allows transmission of water vapour from interior of building

  • Excellent for concrete roof, leaking brick and masonry walls

  • Good resistance to Carbon dioxide and Chloride ion diffusion

 





Liquid Applied Cement Based Membranes-Brushbond RFX

Liquid Applied Cement Based Membranes-Brushbond RFX

 Liquid applied Cement based membranes-Brush bond RFX

Description

High performance elastomeric contentious waterproofing coating

Principal Use

 To produce atmospherically exposed reinforced concrete structures from attack by acid gases.

chloride ions,oxygen& water.suitable for all type of structures including those in coastal environments.Also suitable fo water tanks,reservoirs,drainage,col vents,basements and tools.

Key Properties

Pot Life@ 27ºC       :30min

Adhesion to concrete:   :>1N/mm³     

 


Advantages:

  • Excellent barrier to carbon dioxide, chloride and sulphate ions

  • Allows water vapour to escape from the structure

  • Waterproof-suitable for water retaining structures

  • High resistance to the effect of long-term weathering, durable in all climate conditions including UV attack

  • Non toxic - ideal for potable water tanks

  • Flexible, with thermal expansion similar to concrete

  • Excellent bond to concrete and masonry

  • Good crack accommodation capacity

  • Minimum surface preparation needed and low labour cost
Specification

 Brush bond RFX is a two component acrylic polymer modified cementitious coating which consists of Brush bond RFX powder and Brush bond RFX liquid acrylic emulsion. It requires only the addition of clean water at site to produce an easily brushable coating. Brush bond RFX can simply be applied by stiff brush, roller or trowel to obtain the desired thickness.





Sheet Membranes-Proofex 12

We are expertise in supplying the quality waterproof sheet membrane. Proofex 12 membrane sheet is a self adhesive, polymer-modified bitumen membrane incorporating an aluminum foil layer on a polymer backing film. It is used in a gas resistant, damp-proof and waterproof membrane and as an internally or externally applied tanking membrane. its feature are Cross laminated film for superior performance, fast application and cold applied.


Advantages:

  • 2mm thick (Nominal)

  • Cold applied

  • Fast application

  • Uniform thickness of polymer bitumen membrane

  • Good adhesion to primed concrete substrates

  • Produces a continuous waterproof membrane system

  • Cross laminated film for superior performance


Description:


Proofex 12 is a cold applied self-adhesive sheet membrane comprising of a polymer modified bitumen layer internally reinforced with polyester, bonded on to an outer surface of polyethylene film.





Sheet Membranes-Proofex PGP

Proofex PGP sheet membrane is manufactured in two colors that are light grey on top and black on the underside. These two types of colors are helps to identify any damages that may occur during application. This proofex PGP is Flexible PVC synthetic membrane for the waterproofing. Advantages are Good resistance to puncturing, Resistance to root penetration, Fast application, Welded joints for maximum water tightness.


Advantages:

  • Good resistance to puncturing

  • Resistance to root penetration

  • Fast application

  • Welded joints for maximum water tightness

 

Description:

 

  • Flexible PVC synthetic membrane for the waterproofing of tunnels and below ground structures.
  • The membrane is manufactured in two different colours, it is coloured light grey on top and black on the underside. This helps to identify any damages that may occur during application.

Specification


The waterproofing shall be a 2mm thick loose laid PVC membrane with hot air welded seams.





Solar Reflective Coating-Brushbond TI Flexicoat

We are expertise in trading, supplying and service providers of Solar Reflective Coating-Brush bond TI Flexi coat and Brush bond TI Flexi coat is designed for use as a thermal insulation coating on roof slabs and walls of buildings. It can also be used on the interior walls and the roof of freezer rooms and cold storage facilities. These microspheres collectively act as thermal insulation blanket covering the structure effectively reflecting solar radiation back into the atmosphere. Excellent advantages are Good resistance to atmospheric pollution, Durable - High UV resistance, Breathable - allows water vapor to escape.


Advantages:

  • Minimum surface preparation needed
  • Single component - Brush or roller applied directly on the substrate
  • Light weight yet effective
  • Excellent adhesion to most building substrates
  • Excellent flexibility at both high and low temperatures
  • Non conductive property saves air conditioning energy cost
  • Has resistance to water penetration
  • Flexible - high elongation characteristics
  • Good resistance to atmospheric pollution
  • Durable - High UV resistance
  • Breathable - allows water vapour to escape

Description:

Brushbond TI Flexicoat is a water-based white coloured emulsion comprising of acrylic polymers and specially designed hollow ±microspheres½, less than 100 microns in diameter with non conductive properties. These microspheres collectively acts as thermal insulation blanket covering the structure effectively reflecting solar radiation back into the atmosphere.






Contact Us

*Describe Your Requirements in Detail
Remaining Characters: 3500
Your Contact Information
Your Contact Information
*Name:
*Email:
Company:
Website:
*Country:

City:
*Mobile:
*Enter the code: